For standard orders, we generally ship laser cut parts within 2-4 business days of receiving your cut-ready files. Additional post-process operations such as bending, tapping and powder coating will increase turnaround time.
Our cut-off time for processing new orders is 12 noon, Pacific time, Monday-Friday. (Orders with complex geometry or multiple bends may require additional processing time.) Orders received after 12:01 PM will be started the following business day.
If you see “TBD” on the tracking page for your order, your files are being reviewed and prepped for the laser. An estimated shipping date will be generated in the Tracker once your order is scheduled. Learn more about our shipping process and policies.
Although we cut and process parts 7 days a week, we review orders Monday – Friday to coincide with our shipping carriers.
Powder coating, Anodizing, and Plating – Adds 7-10 days of processing time to your order.
Quantity – Quantities of 100 or more parts may add 2-4 days of processing time to your order.
Weight – Some orders over 80 lbs. will need an additional 1-2 business days for packaging and crating.
Size – Parts larger than 46” in any axis may need 1-2 or more additional days of processing time.
Bending – Adding bending to your order can add 1-3 days of processing time. Most bent parts will ship ground as they will exceed 2″ in height when packed.
Material – Although we stock hundreds of thousands of pounds of material, occasionally we may have a smaller-than-needed amount for your project. If your order requires more than 40 square feet of material, we may ask for an additional 2-5 business days for processing.
Design – We will contact you to request revisions for orders that require file adjustments, proofs, or files do not meet our Design Guidelines. This will delay the order processing, as production cannot begin until we have received the cut-ready files.
Finishing – Ceramic Tumbling adds 2-3 days of processing time.
We’re unable to send photos of parts in production upon request. This is because we strive for efficient processes with the quickest possible turnaround times. Learn more about order production and lead times on our processing page.
You can check the status of any order by logging into your SendCutSend account, navigating to the Orders page, and clicking the Track Order link on the order.
Powder coating adds 7-10 days to an order’s lead time before shipping. For this reason, we strongly recommend ordering finished and unfinished parts separately so we can ship your non-powder coated parts as soon as they’re ready.
Powder coating adds 7-10 days to an order’s lead time. Check out the complete FAQ and our powder coating guidelines for all details, tips, and considerations!
Your estimated ship date is calculated in real-time in your shopping cart as you add parts and services. Production times for standard orders without additional services like bending or finishing are typically 2-4 business days before shipping.
We treat every order as a rush order! Although we are unable to speed up our production, you can add Express, Overnight Shipping at checkout if your order qualifies. This option will not be available for parts shipped outside the US. The express shipping fee will depend on the size and weight of your order.
Мы гордимся тем, что вошли в список 5000 самых быстрорастущих частных компаний. Спасибо нашим замечательным клиентам и команде за то, что позволили нам расти так быстро. Продолжайте творить!
DUNS: 076773502x ITAR: M45162 CAGE: 97DK6 SAM: по запросу
We accept
DXF, EPS, DWG,
and AI files.
Choose from over 60 customizable laser cutting templates.
We’ll review your file and convert to configurable part in your SendCutSend account.
We can scan and convert your paper, foam or cardboard templates.
Ready to order but don’t have your file handy? Enter your email below and we’ll send you a link for our desktop uploader.
We proudly use hardware by PEM
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | FH-M8-12 |
| Thread Size | M8 x 1.25 |
| Hole size in sheet (+0.003/-.0.000) | .315″ |
| Minimum sheet thickness | 0.094″ |
| Maximum sheet thickness | .347″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge | 0.378″ |
| Minimum distance between two of the same hardware (CL to CL) | .567″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .472″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.100″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.250″ |
We proudly use hardware by PEM
Aluminum: 5052, 6061, 7075 Steel: Mild, G30
| SKU | SO-440-8 |
| Thread Size | 4-40 x .250″ |
| Hole size in sheet (+0.003/-.0.000) | .168″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge | 0.230″ |
| When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. | .345″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.119″ |
We proudly use hardware by PEM
Stainless Steel: 304, 316
| SKU | SO4-440-8 |
| Thread Size | 440 |
| Hole size in sheet (+0.003/-.0.000) | .166″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .125″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge | 0.230″ |
| When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. Example shown with x2 of the same hardware. | .313″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .250″ |
| 304 Stainless Steel material ranges | 0.048″-0.125″ |
| 316 Stainless Steel material ranges | 0.060″-0.125″ |
